American Dryer Corp. ML-75DII Installation Manual download pdf (Page 25)

b. Electric Models Only

IMPORTANT: Figures shown are for non-reversing models only. For reversing models contact the

factory.

IMPORTANT: The dryer must be connected to the electric supply shown on the data label that is

affixed to the left side panel/wall area behind the control door. In the case of 208

VAC or 240 VAC, the supply voltage must match the electric service specifications

of the data label exactly.

IMPORTANT: The wire size must be properly sized to handle the related current.

WARNING: 208 VAC and 240 VAC ARE NOT THE SAME. Any damage done to dryer

components due to improper voltage connections will automatically VOID THE

WARRANTY.

NOTE: ADC reserves the right to make changes in specifications at any time without notice or

obligation.

IMPORTANT: 3-phase (3ø) figures shown are for a 3-wire service only.

APPROX.

AMP DRAW

MLE-75 (ELECTRIC)

ELECTRICAL SERVICE SPECIFICATIONS (PER DRYER)

IMPORTANT: 208 VAC and 240 VAC ARE NOT THE SAME . When ordering, specify exact voltage.

NOTES: A. Fuse ratings are dual element, time delay, current limiting, class RK1 or RK5 ONLY.

B. Circuit breakers are thermal/magnetic (industrial) motor curve type ONLY. For others, calculate/verify correct breaker size according to appliance amp draw

rating and type of breaker used.

C. Circuit breakers for 3-phase (3ø) dryers must be 3-pole type.

APPLIED VOLTAGE/PHASE

KW 208/1ø (60 Hz) 240/1ø (60 Hz) 208/3ø (60 Hz) 240/3ø (50/60 Hz) 380/3ø (50 Hz) 416/3ø (50 Hz) 460/3ø (60 Hz)

20 104 90 --- --- 33 --- ---

24 --- --- 72 63 --- 36 33

30 --- --- 88 77 --- 45 41

33 --- --- --- --- 53 --- ---

36 --- --- 105 92 --- 53 48

40 --- --- --- --- --- 59 ---

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 57 58

Comments to this Manuals

No comments

American Dryer Corp. ML-75DII Installation Manual Page 25

Comments to this Manuals

Related products and manuals for Electric laundry dryers American Dryer Corp. ML-75DII